(9) A/G is an excellent sealant designed to lower torque requirements and is an excellent lubricant accomplishing proper make-up quickly with minimum torque. This sealant is also designed dot eliminate wear and galling on stainless threaded connections. It is equally effective on other exotic materials as well as non- ferrous alloys and may also be used on more common types of carbon steel. A/G has passed both the "Shrimp Test" (Drilling Fluid Toxicity Test) and the Static Sheen Test in accordance with EPA standards.
A/G contains a high percentage of PTFE flake to seal off the leak path and prevent passage of liquids or gases at pressures up to 20,000 psi. Contains no metals or other ingredients which may be ...
(6) RS18 is an excellent thread lubricant designed to eliminate wear and galling on stainless or other gall-prone threaded connections. RS18 does not reduce torque requirements to levels below those of other compounds. This is an important feature for applications involving rotary shouldered connections or in other situations where over-torquing is a concern.
RS18 is also recommended for lubrication of shafts or other gall prone mechanisms, which would normally be lubricated with smooth extreme pressure grease. It is intended for use at temperatures ranging from zero to 300 F.
RS18 is a film forming lubricant. It has a strong polar attraction to metal surfaces and applies readily to threads or other ...
(3) 444 contains a 40% blend of lubricating solids, which provide excellent protection from wear and the grinding pressures of slow moving heavy machinery. This grease is primarily intended for use on open gears. It may also be used as a heavy-duty thread compound, especially where resistance to water washout is important.
444 offers the added advantage of long term rust and corrosion protection. It is not only waterproof but also contains additives specifically designed to prevent the damaging effects of salt and other corrosive elements.
444 may be used for other applications such as splines, u-joints, chucks, pillow block bearings and most high impact surfaces or other heavily loaded, slow moving ...
(8) 70+ is a thread compound formulated to provide smooth make-up and breakout of threaded connections. Another primary function is the prevention of rust and corrosion.
70+ contains well over 70% pure molybdenum disulfide, more than any other moly paste. For decades, moly has been recognized for its lubricity under pressure and its ability to pack solidly and smoothly into the pores of metal surfaces. It is also noted for its chemical stability at temperatures below 750° F. 70+ contains a significant concentration of rust and corrosion inhibitors. An H2S inhibitor is also included!
70+ is recommended for general use on threaded connections, press fits and as a nut splitter chisel lubricant. It ...
(4) 72 is a heavy duty, nickel based thread lubricant designed to prevent galling and accomplish proper make-up with less torque. Repeatability is important. 72 has a k-factor which is not only lower, but also, more consistent than any other nickel based compound.
72 is particularly recommended for use in extreme temperatures. Connections subject to "metal creep" may no longer offer a good fit between mating surfaces. The solids package in 72 continues to provide a reliable bearing surface to prevent galling during breakout.
72 does not contain sulfur bearing or other materials that may cause stress cracking (an important feature in the nuclear industry). Recommended for temperatures up ...
